Friday, 22 July 2016

Car Accessories Manufacturers – Enhance look and performance of the car engine

Broadly automotive accessories are divided into main two types – internal and external accessories. The internal accessories there are floor mats, dash cover, air perfume, auto spare parts like liners, sleeves seat cover - these all are included. Exterior parts includes - fog lights, wheel covers, spoilers, gas caps, body covers, etc. To get luxurious look, feel and comfort, you should spend as much as you afford with high capacity of engine. LinerSleeves will help you to choose best auto parts because no doubt everyone is not aware with the part of engine.

Accessories classification :

Automotive parts can be further classified into essential and non essential type. In essential type there are some additional parts required to enhance performance to get low maintenance cost for the car. Exterior accessories only increase the outer look of your car, so it comes under non essential type also. Manufacturers offer various types of car accessories to make your car comfortable, give attractive look and safe drive. Now the question is where can you buy this? There are some customers who like to buy auto parts from the car’s company showroom while some prefer to buy from retailers. Retailer and company showroom, both give you the same product, but there will be price difference. As each brand has its own value, the company’s products have high price in comparison with retail store or any online seller.


Accessories for safety :

It will be dangerous, if you ignore safety precautions while driving the car. In the winder season, there are fog in many area, if your region has same problem, then you must fit fog lights to your car. You can buy snow and ice automobile parts, if there is ice fall in winter season in your area. It will be proved beneficial for many car riders. Don’t compromise while buying safety accessories. Buy accessories from reputed and genuine auto parts exporters to reduce annual maintenance cost and insurance cost. The substandard accessories make more noise in engine after the service or consume more petrol or diesel or gas. If you go with this, then it may happen with you again and you have to get it replaced frequently. So it is better to choose branded spare parts and for that you may have to spend more at initial stage, but then after you will realise that it is cheaper than substandard parts.

You can find nearby manufacturer or exporter on internet, who is the best online accessories seller in your region and try every possible options before going to do final purchase.. Other than this take advice from our experts. We are ready to help you. 

Tuesday, 19 July 2016

Manufacturers Offer Comprehensive Range In Pneumatic Cylinders

Pneumatic cylinder – popularly known as air cylinder, is one type of mechanical device. It uses the power of compressed gas to product the force in a reciprocating linear motion. Mechanical engineers prefer to use this cylinder because it is clean, quiet and require less space for fluid storage. As the operating fluid is gas, no leakage or drip out from this type of cylinder. It is more preferable when cleanliness is required. To develop customized solutions, trained application engineers are functioning as a part of customer’s team to judge their needs accurately. We stand out in the market of United Arab Emirates(UAE), Saudi Arabia and India because we develop special products as per specific requirement.

Types of cylinders :

Manufacturers of pneumatic cylinders often change appearance, size and function of these products as per specification. Types are :
  • Single acting : This cylinder use pressure imparted by compressed air to create force in outer direction and a spring return to home position. It has limited extension due to the space which compressed spring takes up.
  • Double acting : This cylinder use air pressure to move in both – retract and extend strokes. There are two ports – instroke and outstroke to allow air inside. Piston rod is more vulnerable to bending, though stroke length is not limited.

Product range :

LinerSleeves provide excellent personalized service and innovative products to the customers. We offer standard cylinder, ISO cylinders and Specific cylinder and customize product also.
  • Standard Cylinders : It is available in bore sizes ranging from 6mm diameter 350mm diameter. They are made of hard chrome plated heavy duty seamless tubes, chrome plated piston rods, end covers and high quality nitrile seals.
  • ISO Cylinders : These are made as per ISO standard. The square aluminium tube gives sleek look to this product. They include single & double trunnion mounting, front & rear plate mounting, hinge mounting and let mounting.
  • Specific Cylinder : This self reciprocating cylinder is available in bore size 2”, 3” and 4”. Replace your existing non standard bore size, piston rod size and material of the construction, etc.
Generally pneumatic cylinders are used to create force and motion in OEM equipment. They directly and indirectly move products by lifting, pulling, pushing, rotating, etc. These products are widely accepted because of simplicity, economical range, durable and easy to install. As per your specific requirement, select cylinder from our wide range in design, speed, compactness, force output, rack and pinion, etc.

Friday, 8 July 2016

Cylinder liner manufacturing company in India

LinerSleeves established in 1980 is engaged in manufacturing and exporting cylinder liners and sleeves. Since the establishment time, customers appreciate our products due to quality and after sales services. Continuously, we improve product’s quality to achieve utmost customer satisfaction. These top quality cylinder liners have proven to be durable and economical in price for automotive, heavy duty, marine and tractor industries. We provide single custom design product also as per requirement of the customer.  We dedicate our strength for quality manufacturing, modern technology and excellent service.  Our noticeable in depth expertness help clients to engineer effective solutions. As being reputed cylinder liner manufacturing company in India, our vision is to cover global market through strategic ways of action.

Quality
  • Our flexible working environment copes up with international working environment. 
  • Extensive application of statistical techniques for process improvement and cost reduction on a continuous basis. 
  • Total quality management approach that emphasis on process control rather than nonconformities detection Enhance the strength of the process. 
  • Under the guideline of professional each stage of process is under control to reduce the amount of rejection. 
  • We establish in house quality assurance capabilities installed with latest equipments to cope up with requirements of the product.

Process
The manufacturing process is divided into following steps :
  • Melt material as per specification and requirement. 
  • Temperature is controlled or maintained through expert. From each batch, all the elements of the material are adjusted within chemical analysis process and relevant information are recorded. 
  • Centrifugal casting of cylinder liner in machines with pre adjusted speed, cooling rates and pouring can be done at preset temperature.
  • Then these casted liners or sleeves are transferred for rough machining. Then each product is transferred for fine finishing and ultimate physical appearance. 
  • Then all products will pass through cleaning process and give proper attention while packaging. Pack products with safeguard from breakages.

After Sales Services
We offer after sales services like direct replacement of products (after verifying damage). We try to exceed client’s expectations in product quality, delivery and service. We believe in long term relationship based on exceptional customer satisfaction. Our commitment to quality allows us to use latest technology for manufacturing efficient products with uncompromising quality.